subfinder is a subdomain discovery tool that discovers valid subdomains for websites by using passive online sources. It has a simple modular architecture and is optimized for speed. subfinder is built for doing one thing only – passive subdomain enumeration, and it does that very well.
We have designed subfinder to comply with all passive sources licenses, and usage restrictions, as well as maintained a consistently passive model to make it useful to both penetration testers and bug bounty hunters alike.
- Simple and modular code base making it easy to contribute.
- Fast And Powerful Resolution and wildcard elimination module
- Curated passive sources to maximize results (26 Sources as of now)
- Multiple Output formats supported (Json, File, Stdout)
- Optimized for speed, very fast and lightweight on resources
- Stdin and stdout support for integrating in workflows
This will display help for the tool. Here are all the switches it supports.
|-config string||Configuration file for API Keys, etc||subfinder -config config.yaml|
|-d||Domain to find subdomains for||subfinder -d uber.com|
|-dL||File containing list of domains to enumerate||subfinder -d hackerone-hosts.txt|
|-exclude-sources||List of sources to exclude from enumeration||subfinder -exclude-sources archiveis|
|-max-time||Minutes to wait for enumeration results (default 10)||subfinder -max-time 1|
|-nC||Don’t Use colors in output||subfinder -nC|
|-nW||Remove Wildcard & Dead Subdomains from output||subfinder -nW|
|-o||File to write output to (optional)||subfinder -o output.txt|
|-oD||Directory to write enumeration results to (optional)||subfinder -oD ~/outputs|
|-oI||Write output in Host,IP format||subfinder -oI|
|-oJ||Write output in JSON lines Format||subfinder -oJ|
|-r||Comma-separated list of resolvers to use||subfinder -r 220.127.116.11,18.104.22.168|
|-rL||Text file containing list of resolvers to use||subfinder -rL resolvers.txt|
|-silent||Show only subdomains in output||subfinder -silent|
|-sources||Comma separated list of sources to use||subfinder -sources shodan,censys|
|-t||Number of concurrent goroutines for resolving (default 10)||subfinder -t 100|
|-timeout||Seconds to wait before timing out (default 30)||subfinder -timeout 30|
|-v||Show Verbose output||subfinder -v|
|-version||Show current program version||subfinder -version|
subfinder requires go1.13+ to install successfully !
The installation is easy. You can download the pre-built binaries for different platforms from the Releases page. Extract them using tar, move it to your $PATH and you’re ready to go.
> tar -xzvf subfinder-linux-amd64.tar
> mv subfinder-linux-amd64 /usr/bin/subfinder
If you want to build it yourself, you can go get the repo
go get -v github.com/projectdiscovery/subfinder/cmd/subfinder
If you wish to upgrade the package you can use:
go get -u -v github.com/projectdiscovery/subfinder/cmd/subfinder
Running in a Docker Container
You can use the official dockerhub image at subfinder. Simply run –
> docker pull ice3man/subfinder
The above command will pull the latest tagged release from the dockerhub repository.
If you want to build the container yourself manually, git clone the repo, then build and run the following commands
- Clone the repo using
git clone https://github.com/projectdiscovery/subfinder.git
- Build your docker container
docker build -t ice3man/subfinder .
- After building the container using either way, run the following –
docker run -it ice3man/subfinder
The above command is the same as running
For example, this runs the tool against uber.com and output the results to your host file system:
docker run -v $HOME/.config/subfinder:/root/.config/subfinder -it ice3man/subfinder -d uber.com > uber.com.txt
Post Installation Instructions
Subfinder will work after using the installation instructions however to configure Subfinder to work with certain services, you will need to have setup API keys. The following services do not work without an API key:
Theses values are stored in the $HOME/.config/subfinder/config.yaml file which will be created when you run the tool for the first time. The configuration file uses the YAML format. Multiple API keys can be specified for each of these services from which one of them will be used for enumeration.
For sources that require multiple keys, namely
Passivetotal, they can be added by separating them via a colon (:).
An example config file –
- [email protected]:sample_password
If you are using docker, you need to first create your directory structure holding subfinder configuration file. After modifying the default config.yaml file, you can run:
> mkdir $HOME/.config/subfinder
> cp config.yaml $HOME/.config/subfinder/config.yaml
> nano $HOME/.config/subfinder/config.yaml
After that, you can pass it as a volume using the following sample command.
> docker run -v $HOME/.config/subfinder:/root/.config/subfinder -it ice3man/subfinder -d freelancer.com
To run the tool on a target, just use the following command.
> subfinder -d freelancer.com
This will run the tool against freelancer.com. There are a number of configuration options that you can pass along with this command. The verbose switch (-v) can be used to display verbose information.
The -o command can be used to specify an output file.
> subfinder -d freelancer.com -o output.txt
To run the tool on a list of domains,
-dL option can be used. This requires a directory to write the output files. Subdomains for each domain from the list are written in a text file in the directory specified by the
-oD flag with their name being the domain name.
> cat domains.txt
> subfinder -dL domains.txt -oD ~/path/to/output
> ls ~/path/to/output
If you want to save results to a single file while using a domain list, specify the -o flag with the name of the output file.
> cat domains.txt
> subfinder -dL domains.txt -o ~/path/to/output.txt
> ls ~/path/to/
You can also get output in json format using -oJ switch. This switch saves the output in the JSON lines format.
If you use the JSON format, or the Host:IP format, then it becomes mandatory for you to use the -nW format as resolving is essential for these output format. By default, resolving the found subdomains is disabled.
> subfinder -d hackerone.com -o output.json -oJ -nW
> cat output.json
The –silent switch can be used to show only subdomains found without any other info.
You can specify custom resolvers too.
> subfinder -d freelancer.com -o result.txt -nW -v -r 22.214.171.124,126.96.36.199
> subfinder -d freelancer.com -o result.txt -nW -v -rL resolvers.txt
The new highlight of this release is the addition of stdin/stdout features. Now, domains can be piped to subfinder and enumeration can be ran on them. For example –
> echo "hackerone.com" | subfinder -v
> cat targets.txt | subfinder -v
The subdomains discovered can be piped to other tools too. For example, you can pipe the subdomains discovered by subfinder to the awesome httprobe tool by @tomnomnom which will then find running http servers on the host.
> echo "hackerone.com" | subfinder -silent | httprobe