Sale!

Crazy Radio PA 2.0

$90.00 $65.00

Crazy.radio PA is a long range open USB radio dongle based on the nRF24LU1+ from Nordic Semiconductor.

It features a 20dBm power amplifier, LNA and comes pre-programmed with Crazyflie compatible firmware. The power amplifier boosts the range, giving a range of more than 1km (line of sight) together with the Crazyflie 2.0 and above 2km Crazyradio PA to Crazyradio PA (line of sight).

Compatible with mousejack, keyjack, keysniffer, and JackIt projects.

192 in stock

Compare
SKU: 32811723464 Category: Tag:

Description

Crazy.radio PA is a long range open USB radio dongle based on the nRF24LU1+ from Nordic Semiconductor. It features a 20dBm power amplifier, LNA and comes pre-programmed with Crazyflie compatible firmware. The power amplifier boosts the range, giving a range of more than 1km (line of sight) together with the Crazyflie 2.0 and above 2km Crazyradio PA to Crazyradio PA (line of sight).

The Crazyradio PA is not only for usage together with the Crazy.flie and Crazy.flie 2.0. Since it’s an open project with firmware written from scratch and a Python API for usage it’s great building block for systems that require longer range than WiFi and doesn’t have the same requirements for bandwidth. The hardware comes shipped with the latest firmware as well as a bootloader that enables firmware upgrades via USB without any additional hardware needed.

Compatible with mousejack, keyjack, keysniffer, and JackIt projects.

Features

  • Radio power amplifier giving 20dBm output power
  • > 1km range LOS with Crazyflie 2.0
  • 2×5 2.54mm header for prototyping (not mounted)
  • Hardware support for PPM
  • Same mechanical footprint as the first generation Crazyradio
  • Open source firmware
  • Firmware upgrade via USB
  • Low latency

 

Specifications

  • Based on nRF24LU1+ chip from Nordic Semiconductor
  • 8051 MCU at up to 16MHz with 32Kb flash and 2Kb SRAM
  • 2.4GHz ISM band radio
  • USB device peripheral
  • 125 radio channels
  • 2Mbps, 1Mbps and 250Kps communication data-rate
  • Sends and receives data packets of up to 32 bytes payload
  • Automatically handles addresses and packet ack
  • Hardware SPI and UART
  • Combatible with ShockBurst protocol from Nordic Enhanced Semiconductor

 

Radio specification:

  • 20dBm output power (100mW)
  • Low Noise Amplifier (LNA)
  • RP-SMA connector
  • Can be with up 13V via expansion powered to header
  • With 2.54mm header following signals (not mounted) 2×5 expansion:
  • Hardware support for PPM input
  • Up to 13V input power
  • GND
  • PPM
  • SPI/UART
  • Standard USB-A connector
  • Mechanical specifications
  • Weight: 6Z
  • Size (WxHxD): 58x16x6.5mm (including connectors)

 

Package contents

  • 1 x Crazyradio PA
  • 1 x Duck antenna 2dBi

Additional information

Brand Name

KEFU

Reviews

There are no reviews yet.

Be the first to review “Crazy Radio PA 2.0”

Your email address will not be published. Required fields are marked *