Sale!

Raspberry Pi 3 Model B+ Complete Kit with LCD

$100.00 $85.00

3.5 inch touch screen is the most popular touch screen for Raspberry Pi with dual use ABS case.

4924 in stock

Compare
SKU: 32945416376 Category: Tags: ,

Description

Raspberry Pi 3 Model B+ 3.5 inch Touchscreen LCD + ABS Case + 32GB SD Card + 3A Power Adapter + Heatsinks + HDMI for RPI 3B Plus

Please leave a message which Case Color ( Black / Gray / White / Transparent ) and Power Plug ( EU / US / UK / AU ) you would like us to send.

Feature :

1. Case :

(1). Daul use : First use : install Raspberry Pi with 3.5 inch touchscreen ; Second use : install Raspberry Pi with cooling fan ( as the following picture show )

(2). Material : ABS

(3). Color : Black / Gray / White / Transparent

(4). How to install the 3.5 inch touchscreen :

a). Install the Raspberry Pi on the base board

b). ​Please stick the pad on the back of 3.5 inch touchscreen ( as the picture show ) , then insert the 3.5 inch touchscreen on Raspberry Pi by GPIO pin correctly ( don’t be malposed )

c). Install the enclosure part

2. Power Adapter :

(1). Input : 100 – 240V, 50/60Hz AC

(2). Output : 5V 3A , DC

(3). Plug : EU / US / UK / AU ( leave a message in the order for the type you want )

(4). Chariging cable : with ON/OFF switch button on it to cut off or start the power , about 1M length

3. SD Card : 32GB capacity , Class 10 standard , with USD 2.0 SD Card reader

4. HDMI Cable : Male to Male , about 1M length

5. Heatsinks : 2 copper one + 1 aluminum one

6. 3.5 inch touchscreen :

(1). 480*320 resolution , Resistive touch type ( with touch pen )

​(2). The touchscreen need to use the system configured for it , otherwise you can not use it , here we provide the system image which we have configured , the link : //drive.google.com/open?id=18KyRmdQ_Dm–P824b5qGjkXwmIZO9jW8

You can also configure by yourself , just refer to this link : //github.com/goodtft/LCD-show

We also provide configure way for Raspbian system in the bottom of link. If you have any problem about system , please contact us at first time.

This 3.5 inch touch screen connect to Raspberry Pi by GPIO pin , instead of HDMI port. So please don’t use the HDMI port when you connect the 3.5 inch touch screen on Raspberry Pi . The Raspberry Pi doesn’t support display on this 3.5 inch touchscreen and other monitor at the same time.

Note:

Please plug the screen on Raspberry Pi’s GPIO pins correctly( as the picture) , otherwise the touch function will be damaged.

Package list :

 

1 x Raspberry Pi 3 Model B+

1 x 3.5 inch Touch Screen

1 x Touch Pen

1 x ABS Case

3 x Heat Sinks

1 x 32GB SD Card

1 x SD Card Reader

1 x 3A Switch Power Adapter

( as following picture show )

Dual use case :

How to use it with Raspbian system

This LCD Module need install driver first.

Step 1:Download the Raspbian IMG

//www.raspberrypi.org/downloads/raspbian/

Step 2: Burn the system image

If you don’t know how to do that,you can refer to the Raspberry Pi office tutorial

Step 3: Open terminal(SSH) and install the driver on RaspberryPi

(tested on RaspberryPi 3B+,3B,2B,2B+,1B,ZERO)

Run:

sudo rm -rf LCD-show

git clone //github.com/goodtft/LCD-show.git

chmod -R 755 LCD-show

cd LCD-show/

sudo ./LCD35-show

Wait A Few Minutes, when the system reboot ok, you can see that.

Touch screen calibration

This LCD can be calibrated using a program called xinput_calibrator

1. Install it with the commands :

cd LCD-show/

sudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.deb

2. Click the Men button on the task bar, choose Preference -> Calibrate Touchscreen.

3. Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.

4. You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists).

/ect/X11/xorg.conf.d/99-calibration.conf

5. Save the touch parameters (may differ depending on LCD) to 99-calibration.conf

Additional information

Demo Board Type

ARM

Brand Name

Raspberry pi

Processor Brand

BROADCOM

Model Number

Raspberry Pi 3 Model B+

ROM Capacity

None

Intergrated Feature

WiFi 802.11b/g/n

Interface

HDMI/RCA Output

Memory Capacity

1GB

LCD

3.5 inch Touch Screen

Case

ABS Case ( Dual-use )

SD Card

32GB , Cass 10 Standard

Case Color

Black / Gray / White / Transparent

HDMI

Male to Male , V1.4 , 1M approx

Power Adapter

5V 3A , with ON/OFF switch

Reviews

There are no reviews yet.

Be the first to review “Raspberry Pi 3 Model B+ Complete Kit with LCD”

Your email address will not be published. Required fields are marked *